There are three types of DU Series Rotary Slips: DU, DUL and SDU. They are with large handling range and light weight. Therefore, these slips have larger contact area on the taper and heat-treated for strength and wear resistance. They are designed and manufactured according to API Spec 7K.

DU Rotary Slips最先出现在DEZHOU L&A PETROLEUM MACHINERY CO.,LTD。

I Advantages of L-Shaped Fluid-End Module:

• Less expensive and easier to maintain
• More metal to support internal pressures
• Designed to run with liner wear plates
• No Lower valve guide needed
• Comes with HP Quick-Change Valve Cover assemble

II Available 7500 P.S.I. Models include:

• BOMCO F1600
• EMSCO FB1600
• GARDNER DENVER PZ11
• HH F1600
• NATIONAL 12P160
• OILWELL A1700PT

III SOUTHWEST BOMCO F1600 7500 PSI

SOUTHWEST BOMCO F1600 7500PSI Fluid-End Upgrades最先出现在DEZHOU L&A PETROLEUM MACHINERY CO.,LTD。

IDECO T1300 MUD PUMP

MUD PUMPS EXPENDABLESIDECO

7 1/2× 12????????? ??????????????????????????????????????????????????? ?????????T1300

IDECO T-1300

FLUID END MODULE AND ACCESSORIES

IDECO T1300 MUD PUMP最先出现在DEZHOU L&A PETROLEUM MACHINERY CO.,LTD。

MODEL：2S

Speed (Max.):1800r/min

Displacement:20L/min

Discharge pressure:1.4Mp

Materials: Alloy steel

2S GEAR PUMP最先出现在DEZHOU L&A PETROLEUM MACHINERY CO.,LTD。

LA300 PLUNGER PUMP is a 300 horsepower 5” stroke horizontal quintuplex single acting plunger pump.Available in two fluid end materials at pump speeds up to 400 RPM and multiple accessory gear reduction unit ratios.

Specifications:

Pump Sizemaximum plunger size x stroke length,in.(mm): 4×5(102 x 127)

Ratedbhp at 400 rpm (kw): 300 (224)

Rated plunger load,pounds(Kg): 10,700(4853.5)

Maximum discharge pressure:psi(kPa)

“L”model:1650 (11,375)

“M”model:3000 (20,682)

“H”model:5000 (34,470)

Crankshaft extension:in.(mm)

Diameter:4.875 (123.8)

Length long side:11 11/16 (297)

Length short side:5 5/8 (143)

Keyway (width x depth):11/4 x 5/8 (32 x 16)

Maximum recommended sheavein.(mm):58 (1473)

Minimum recommended sheave in.(mm):36 (914)

For larger sizes:Contact Factory

Pinion shaft extension,

if gear reducer is supplied,in.(mm)

For belt or chain drive:

Contact Factory

For direct drive:Diameter:3.5 (88.9)

Length:5 11/16 (145)

Keyway (width x depth):7/8 x 7/16 (22.2 x 11.1)

Accessory gear reduction unit:

2.27:1,2.89:1,3.25:1,3.36:1,3.69:1,

4.38:1,4.84:1,5.63:1

Oil Capacity,gallons (L)

Crankcase:12 (45.5)

Gear Reducer-varies with ratio:

3.5 to 6.5 (13.2 to 24.6)

Weight,pump only on

wood shipping skids,pounds (Kg)

“L”:7000 (3175)

“M”:6750 (3062)

“H”:6840 (3103)

Gear reducer,approximate,pounds (Kg): 1100 (499)

LA300 PLUNGER PUMP MANUAL

LA300 PLUNGER PUMP最先出现在DEZHOU L&A PETROLEUM MACHINERY CO.,LTD。

I. LEEF165 PLUNGER PUMP Technical Specification

II. LEEF165 PLUNGER PUMP Performance Parameter Table

LEE-165 PLUNGER PUMP MANUAL

LEEF165 PUMP最先出现在DEZHOU L&A PETROLEUM MACHINERY CO.,LTD。

I. LW440 Mud Pump Technical Specification

II. Tructure Character

The pump is compact structure, small volume, lightweight, integrated herringbone gear pair, large transmit torque and smooth run. Crankshaft is welding forged and light weight without libration.
LW440 Mud Pump Single-acting Triplex Pump can be used widely in oilfield operation. Liner size from 3-1/4″—4-1/2″ is better-adopted piston structure for workover operation and low well drilling operation while plunger structure for liner size from 2—31/4″ for high- pressure operation.

III. Performance Parameter Table

G/m： Gallon/min | L/m: Liter/min

G/m： Gallon/min | L/m: Liter/min

LW440 MUD PUMP最先出现在DEZHOU L&A PETROLEUM MACHINERY CO.,LTD。

I. LEED165 PUMP Technical Specification

II. LEED165 PUMP Tructure Character

III. LEED165 PUMP Performance Parameter Table

LEE-165 PLUNGER PUMP MANUAL

LEED165 PUMP最先出现在DEZHOU L&A PETROLEUM MACHINERY CO.,LTD。

I. LHE215 PLUNGER PUMP SPECIFICATIONS

Maximum BHP: 215 HP (160 KW)
Maximum RPM: 300 rpm
No. of Plungers: 3
Stroke Length: 5 in. (127 mm)
DisOil Capacity: 12 gal. (45 liters)
Plunger Load: 37,000 lbs. (16,965 kg)
Test Pressure 3,600 psi (1,633 kg/cm2)
Pump Weight: 3,990 lbs. (1,810 kg) charge Hydrostatic

II. LHE215 PLUNGER PUMP STANDARD EQUIPMENT

III. PUMP PERFORMANCE

LHE215 PUMP最先出现在DEZHOU L&A PETROLEUM MACHINERY CO.,LTD。

I. LG3 PUMP Construction features:

Solid connecting rod
Eccentric construction
Splash lubrication
Reversible shaft
Horizontal design for low suction
Suction and discharge either side
Individual valve cover plates
Aluminum bronze fluid end

II. LG3 PUMP Performance Data:

LG3 PUMP最先出现在DEZHOU L&A PETROLEUM MACHINERY CO.,LTD。